








Speakers are in very good condition. They were installed and stayed in one location and were never transported to other locations. Photos show every side of the speakers, the top of one speaker is missing the mounting hole cover. Specifications: Active or Passive: Passive Frequency Response: 65 Hz - 20 kHz Power Capacity: 175 Watts Maximum Sound Pressure Level (SPL) Not applicable Nominal Sensitivity: 92dB Impedance: 8 ohms Crossover: 2.2kHz Low Frequency Driver: 8" Woofer Product info: Featuring a compact two-way design, high sensitivity and the ability to reproduce sound accurately over extended periods of time, the Electro-Voice Sx80 is a worthy alternative for use in studios, clubs, bars, or theaters. The Sx80 cabinet design offers RMD (Ring-Mode Decoupling) which controls both acoustical and mechanical ring modes, allowing for more intelligibility and reduced resonance, and therefore greater clarity. The high-frequency titanium horn's voice coil is coupled to the diaphragm to produce a smoother, flatter response requiring less internal equalization. Compact and simple in appearance, yet advanced in design and sound, the inexpensive Sx80 sets a standard in audio coverage, intelligibility and value. 175 Watts long-term power 60 Hz - 20 kHz Frequency Response 8 in. woofer with 1 in. throat compression titanium driver High-frequency circuit protection permits short-term transients to pass while protecting long-term power extremes that may otherwise damage the system Constant-Directivity horn for unusually uniform coverage over the range of operation RMD (Ring-Mode Decoupling) for increased intelligibility and less "muddiness" High-Frequency Protection Circuit
- BrandElectro-Voice