QSC Model 1400 Amplifier

Equipment was recently pulled from a working system in a restaurant. It is being sold “as is” but should be in good working condition. QSC MODEL 1400 SPECIFICATIONS OUTPUT POWER (per channel): Continuous Average Output Power both channels driven: 8 ohms, 20 Hz-20 kHz, 0.1% THD 200 watts 4 ohms, 20 Hz-20 kHz, 0.1% THD 300 watts Continuous Average Output Power one channel driven: 8 ohms, 1 kHz, 1% THD 270 watts 4 ohms, 1 kHz, 1% THD 450 watts 2 ohms, 1 kHz, 1% THD 550 watts ±1 dB Continuous Average Output Power bridged mono operation: 16 ohms, 20 Hz-20 kHz, 0.1% THD 400 watts 8 ohms, 20 Hz-20 kHz, 0.1% THD 600 watts DISTORTION (8 ohms): THD, 20 Hz-20 kHz at rated power shall be less than 0.1%. SMPTE-IMD less than 0.025% at rated power. FREQUENCY RESPONSE: 20 Hz-20 kHz, +0,-1 dB at 1 watt POWER BANDWIDTH: 5 Hz to 65 kHz SLEW RATE: 18 V/us. DAMPING FACTOR: 200 at 8 ohms. DYNAMIC HEADROOM: 2 dB at 8 ohms NOISE: -100 dB below full output, Aweighted. SENSITIVITY: With gain control at maximum, 32 dB voltage gain. 1.00 Vrms for rated power at 8 ohms. INPUT IMPEDANCE: 20 kilohms balanced and unbalanced noninverting or 10 kilohms unbalanced inverting. POWER REQUIREMENTS: 110-125 Vac, 60 Hz POWER CONSUMPTION: 8.6 Aac at 120 V. DIMENSIONS: 5.25" tall(three rack spaces), 19" wide, 9.5" deep WEIGHT: 34 lb net, 37 Ib shipping weight. Spec Sheet: https://www.qscaudio.com/resource-files/productresources/amp/discontinued/series_one/1400/q_amp_seriesone_1400_specs.pdf