Land Rover Evoque Diff Control Module EJ32-4C170-BA Used

Manufacturer Technical Specifications • OEM Part Number: EJ32-4C170-BA • Function: Controls the electronically-actuated rear differential clutch pack (Active/Dynamic Driveline) — engages/manages torque transfer to the rear axle for AWD torque vectoring • Housing: Glass-filled nylon 66 (PA66-GF30), metal mounting bracket, two multi-pin connectors (16-pin and 8-pin) for vehicle harness and internal actuator/clutch wiring • Manufactured by Continental (supplier ref. (contact info removed)) for Land Rover • Made in Austria • Sold individually — mounting bracket/hardware included as shown in photos; no wiring harness or actuator motor included unless stated Compatibility / Fitment ⚠️ Important: this module is tied to whether the vehicle has the Active/Dynamic Driveline option (the 3-piece rear driveshaft AWD system with electronic torque vectoring) — it is not engine-specific and is not compatible with base “Efficient Driveline” 2-piece-driveshaft AWD models, which don’t use this control unit at all. Confirm your vehicle has Active/Dynamic Driveline before buying, regardless of engine. • Land Rover Range Rover Evoque (L538): 2014–2019, Active/Dynamic Driveline models only — 2.0L Ingenium turbocharged petrol (Si4) and diesel (Td4/eD4) engines • Land Rover Discovery Sport (L550): 2015–2019, Active Driveline models only — same 2.0L Ingenium petrol/diesel engine range • Not compatible with: base “Efficient Driveline” Evoque/Discovery Sport trims (no rear diff control module fitted), and not confirmed for Jaguar E-Pace or 2020+ facelift Evoque, which use a different, later-generation module (LR086488) — do not substitute without matching the part number. • Buyer responsibility: confirm fitment using YOUR OWN vehicle’s VIN before purchasing. We do not track or disclose the donor vehicle’s VIN — it has no bearing on fitment; only the part number and driveline type matter. • Land Rover Range Rover Evoque 2014–2019 (Active/Dynamic Driveline only) • Land Rover Discovery Sport 2015–2019 (Active Driveline only) • Petrol (Si4) and Diesel (Td4/eD4) 2.0L Ingenium engines — engine type doesn’t determine fitment, driveline system does • Confirm your vehicle has the Active/Dynamic Driveline option before buying • Match part number EJ32-4C170-BA exactly — do not substitute a later LR-prefix module Item Description Pulled from a donor vehicle here in NYC. Both units are clearly stamped EJ32-4C170-BA with intact labels, QR/barcodes, and legible date codes (one 30-Mar-2017, one 03-Feb-2020) — no water intrusion, cracked housings, or corrosion on the connector pins in either unit. Connectors and mounting tabs are complete and undamaged. The metal shield/bracket plates are present and photographed separately so you can see the full assembly. Sold as-is, used, untested. We have not bench-tested, powered up, or run any diagnostic/communication check on either unit — they’re sold strictly on their physical condition and confirmed part number match, not on verified function. No manufacturer warranty is included. Condition Statement - Used, sold as-is / untested, no warranty. Physical condition as shown in photos — no visible cracks, corrosion, or connector damage on either unit. - Item-specific note: sold as electrical component only — no core charge, no mounting hardware beyond what’s shown, no wiring harness/actuator motor included. purchase - Module tests as non-functional or fails to communicate after install — since this item is explicitly sold untested/as-is, non-function is not grounds for return