3/8" #5 Slim Line Blue Filter Housing

NEW 3/8-Inch 5-Inch Slim Line Blue Filter Housing with Pressure Relief. Included One Spun Polypropylene Filter Cartridge. This Pentek 158002 3/8" #5 Slim Line blue filter housing with pressure relief is suitable for low flow rate applications that have space restrictions. The sump and cap are made of reinforced polypropylene for strength and resistance to chemicals. The cap has 1/4" female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 5" x 2-1/2" sediment or carbon filter cartridge. It has an initial pressure drop of 2 pounds per square inch (psi) at a flow rate of 3 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets Food and Drug Administration (FDA) standards, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others. Filter cartridge size (H x W) (One included Spun Polypropylene Filter Cartridge) 5 x 2-1/2 inches (127 x 63.5 mm) Initial pressure drop at 3 gpm 2 psi Maximum temperature 125 degrees F (51.7 degrees C) Maximum pressure 125 psi Maximum dimensions (H x W) 7 x 4-3/8 inches (178 x 111 mm) Slim filter housing for low-flow applications with space restrictions. Reinforced polypropylene for strength and chemical resistance. Holds any 5" x 2-1/2" sediment or carbon filter cartridge or Filter Cartridge, 4-7/8-Inch x 2-3/8-Inch. Pressure relief button for easier cartridge replacement.