Glacier Bay Square 6 in LED Showerhead

This Glacier Bay 6-inch Square LED Showerhead (Model #1003 908 535) is a water-powered fixture that changes color based on water temperature, requiring no batteries or external power. Key Features Temperature-Based LED Colors: The lights change from Blue (below 95°F) to Violet/Magenta (95–110°F) and then to Red (above 110°F). Eco-Friendly: It is WaterSense certified with a flow rate of 1.8 GPM to help reduce water usage. Low Maintenance: Features "rub-clean" nozzles designed to prevent mineral build-up and clogging. Finish: Polished Chrome. Installation Basics Installing this showerhead is a straightforward DIY project that typically takes about 15 minutes. Remove Old Head: Unscrew your current showerhead by turning it counterclockwise. You may need an adjustable wrench or pliers if it's on tight. Clean Threads: Wipe away any old thread seal tape or debris from the shower arm. Apply Tape: Wrap new PTFE (thread seal) tape clockwise around the shower arm threads 1–2 times to prevent leaks. Attach New Head: Screw the new Glacier Bay showerhead onto the arm by turning it clockwise. Hand-tighten it first; if it leaks during testing, give it a slight additional turn with a wrench, but avoid overtightening. Cash preferred Pick up Mississauga near Hurontario and Eglinton