Schiit Audio Vali 3 Tube Hybrid Headphone Amp & Preamp

Brand new, no signs of use whatsoever with less than 10 hours of on time. Purchased June 2026 direct from Schiit at $340 including shipping and duties. Selling as I purchased two different models and decided to keep the higher-end model. Hoping to save a fellow enthusiast some money while I’m at it. Maximum Power, 32 ohms: 1500mW RMS per channel Maximum Power, 50 ohms: 1000mW RMS per channel Maximum Power, 300 ohms: 400mW RMS per channel Maximum Power, 600 ohms: 200mW RMS per channel Note: Maximum power rated at less than 10% THD for tube and tube hybrid amps, as compared to less than 1% for solid state. Low Gain: Frequency Response: 20Hz-20Khz, +/-0.02db at 300 ohms, 20Hz-20Khz, +/-0.6db at 32 ohms THD: <0.007%, 20Hz-20KHz, at 1V RMS, 300 ohms IMD: <0.014%, CCIR, 300 ohms SNR: >117db, A-weighted, referenced to 2V RMS Crosstalk: -87dB, 20Hz-20KHz, 300 ohms Output Impedance: 0.5 ohms High Gain: Frequency Response: 20Hz-20Khz, +/-0.04db at 300 ohms, 20Hz-20Khz, +/-0.6db at 32 ohms THD: <0.35%, 20Hz-20KHz, at 1V RMS, 300 ohms IMD: <0.45%, CCIR, 300 ohms SNR: >105db, A-weighted, referenced to 2V RMS Crosstalk: -70dB, 20Hz-20KHz, 300 ohms Output Impedance: 1.8 ohms Input Impedance: 50K ohms Gain: 5 (14dB) or 1 (0dB) Topology: Coherence™: tube voltage gain with convolved bipolar current mode inverter and discrete bipolar class A driver and Class AB output stage Protection: delayed start and fast shut-down with muting relay Power Supply: wall wart with 24VAC and 6VAC outputs, regulated HV and LV rails for tube and bipolar components, 6V AC heater Power Consumption: 9W Size: 5 x 3.5 x 2.75” Weight: 1 lb